|
|
 ScrubAir Systems custom designed, fabricated and installed two identical 10,000 CFM Chrome Ventilation Systems for Precision Hard Chrome in Canton, Ohio. Arlan Grace, the owner, contacted Tom O'Connor and requested a quotation for air pollution control equipment that could surpass the EPA emission requirements mandated by the government.
Precision Hard Chrome chose ScrubAir's proposal over the other quotes submitted for two reasons: Competitive Pricing
Consistent positive feedback from ScrubAir references who assured him that he could trust ScrubAir to provide a superior design for ventilation that would pass EPA testing and require very little maintenance - guaranteed!
The price of the ScrubAir system allowed room in the Precision Hard Chrome budget for Mr. Grace to purchase new tanks, rectifiers, and resurface the floor and pits in his entire work area. The ScrubAir systems included a 20,000 CFM air make-up system which were all installed with minimal down time for Precision Hard Chrome.
Ten months later the ScrubAir system was tested by an independent firm at full amperage on each tank - both tested well below the 0.015 mg/dscm, with one testing at 0.0035 mg/dscm. After one year, these systems were still operating with very little water usage (each unit uses only 20 gallons per day to rinse the pads, then gravity flows back into the tank as make-up water), and the pressure drop across the three stages has not increased. (The EPA allows 1 inch increase in S.P. before requiring that the system be shut down and the pads manually cleaned).
|
